| Current File : //usr/man/man1m/sasinfo.1m |
'\" te
.\" Copyright (c) 2009, 2011, Oracle and/or its affiliates. All rights reserved.
.TH sasinfo 1M "16 Aug 2011" "SunOS 5.11" "System Administration Commands"
.SH NAME
sasinfo \- Serial Attached SCSI HBA port command line interface
.SH SYNOPSIS
.LP
.nf
\fBsasinfo\fR hba [\fB-v\fR] [\fIHBA_Name\fR]...
.fi
.LP
.nf
\fBsasinfo\fR hba-port [\fB-lvy\fR] [\fB-a\fR \fIHBA_Name\fR] [\fIHBA_port_nam\fR]...
.fi
.LP
.nf
\fBsasinfo\fR expander [\fB-vt\fR] [\fB-p\fR \fIHBA_port_Name\fR] [\fIExpander_SAS_Addr\fR]...
.fi
.LP
.nf
\fBsasinfo\fR target-port [\fB-s\fR | \fB-v\fR] [\fITarget_port_SAS_Addr\fR]...
.fi
.LP
.nf
\fBsasinfo\fR logical-unit | lu [\fB-v\fR] [\fIdevice_path\fR]...
.fi
.LP
.nf
\fBsasinfo\fR [\fB-V\fR]
.fi
.LP
.nf
\fBsasinfo\fR [\fB-?\fR]
.fi
.SH DESCRIPTION
.sp
.LP
The \fBsasinfo\fR utility is a command line interface that collects administrative information on Serial Attached SCSI-2 (SAS-2) host bus adapter (HBA) that supports the Storage Management HBA API (SM-HBA). The utility reports attributes of HBA ports and of expander devices and SCSI target devices that might be connected to those HBA ports.
.sp
.LP
\fBsasinfo\fR is implemented as a set of subcommands, described below.
.SH SUB-COMMANDS
.sp
.LP
The following subcommands are supported by \fBsasinfo\fR.
.sp
.ne 2
.mk
.na
\fB\fBhba\fR\fR
.ad
.sp .6
.RS 4n
Lists information for the HBA referenced by the specified \fIHBA_name\fR. If \fIHBA_name\fR is not specified, all HBAs on the host will be listed.
.RE
.sp
.ne 2
.mk
.na
\fB\fBhba-port\fR\fR
.ad
.sp .6
.RS 4n
Lists information for the HBA port referenced by the specified \fIHBA_port_Name\fR. If \fIHBA_port_Name\fR is not specified, all HBA ports on the host will be listed. Note that HBA ports can be dynamically configured/unconfigured so that the number of HBA ports on an HBA can change as connections to target devices are established. With no connections to a storage device, no HBA port is configured.
.RE
.sp
.ne 2
.mk
.na
\fB\fBexpander\fR\fR
.ad
.sp .6
.RS 4n
Lists hierarchical view of the expander referenced by the specified \fIExpander_SAS_Addr\fR. If no argument is specified, all expanders that are visible across all HBA ports on the host will be listed.
.RE
.sp
.ne 2
.mk
.na
\fB\fBtarget-port\fR\fR
.ad
.sp .6
.RS 4n
Lists information for those target ports referenced by \fITarget_port_SAS_Addr\fR address. If no argument is specified, all target ports that are visible on the host will be listed.
.RE
.sp
.ne 2
.mk
.na
\fB\fBlogical-unit\fR | \fBlu\fR\fR
.ad
.sp .6
.RS 4n
Lists the logical unit referenced by the specified \fIdevice_path\fR. If \fIdevice_path\fR is not specified, all SAS logical units will be listed, including the SAS Management Protocol (SMP) target port.
.RE
.SH OPTIONS
.sp
.LP
The following options are supported.
.sp
.ne 2
.mk
.na
\fB\fB-?\fR, \fB--help\fR\fR
.ad
.sp .6
.RS 4n
Displays usage information
.RE
.sp
.ne 2
.mk
.na
\fB\fB-a\fR, \fB--hba\fR \fIHBA_Name\fR\fR
.ad
.sp .6
.RS 4n
Retrieve HBA port information from the \fIHBA_Name\fR of an HBA on the host. The \fB-a\fR option can only be used with the \fBhba-port\fR subcommand.
.RE
.sp
.ne 2
.mk
.na
\fB\fB-l\fR, \fB--phy-linkstat\fR\fR
.ad
.sp .6
.RS 4n
Lists the link error statistics information for the \fBphy\fRs on the HBA port referenced by the specified \fIHBA_port_Name\fR or all HBA ports if no HBA port is specified. This option is used only with the \fBhba-port\fR subcommand.
.RE
.sp
.ne 2
.mk
.na
\fB\fB-p\fR \fIHBA_port_SAS_Addr\fR, \fB--port\fR \fIHBA_port_SAS_Addr\fR\fR
.ad
.sp .6
.RS 4n
Retrieve remote port information from the \fIHBA_port_SAS_Addr\fR of the local HBA port on the host. The \fB-p\fR option can be used only with the \fBexpander\fR subcommand.
.RE
.sp
.ne 2
.mk
.na
\fB\fB-s\fR, \fB--scsi\fR\fR
.ad
.sp .6
.RS 4n
Lists SCSI attributes for target ports that are requested for display. This option is only used for the \fBtarget-port\fR subcommand.
.RE
.sp
.ne 2
.mk
.na
\fB\fB-v\fR, \fB--verbose\fR\fR
.ad
.sp .6
.RS 4n
Display details on hardware information, such as SAS address, topology device, and so forth, based on which subcommand is invoked.
.RE
.sp
.ne 2
.mk
.na
\fB\fB-V\fR, \fB--version\fR\fR
.ad
.sp .6
.RS 4n
Displays the version information.
.RE
.sp
.ne 2
.mk
.na
\fB\fB-y\fR, \fB--phy\fR\fR
.ad
.sp .6
.RS 4n
Lists the \fBphy\fR information on the HBA port specified by \fIHBA_port_Name\fR or all HBA ports if no HBA port is specified. This option is used only with the \fBhba-port\fR subcommand.
.RE
.SH EXAMPLES
.LP
\fBExample 1 \fRListing All HBAs
.sp
.LP
The following command lists all HBAs on the host.
.sp
.in +2
.nf
# \fBsasinfo hba\fR
HBA Name: SUNW-pmcs-0
HBA Name: SUNW-pmcs-1
.fi
.in -2
.sp
.LP
\fBExample 2 \fRListing All HBAs with Details
.sp
.LP
The following command lists all HBAs on the host, along with related details. Note that each HBA has two HBA ports configured, with each HBA port connected to a storage device.
.sp
.in +2
.nf
# \fBsasinfo hba -v\fR
HBA Name: SUNW-pmcs-0
Manufacturer: sun
Model: SAS Gen-2
Firmware Version: 1.1
FCode/BIOS Version: 1.1
Serial Number: 111-11111
Driver Name: smvsl
Driver Version: 1.1
Number of HBA Ports: 2
HBA Name: SUNW-pmcs-1
Manufacturer: sun
Model: SAS Gen-2
Firmware Version: 1.1
FCode/BIOS Version: 1.1
Serial Number: 111-11111
Driver Name: smvsl
Driver Version: 1.1
Number of HBA Ports: 2
.fi
.in -2
.sp
.LP
\fBExample 3 \fRListing All HBA Ports
.sp
.LP
The following command lists all HBA ports on the host.
.sp
.in +2
.nf
# \fBsasinfo hba-port\fR
HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
HBA Port Name: /dev/cfg/c2
HBA Name: SUNW-pmcs-1
HBA Port Name: /dev/cfg/c3
HBA Port Name: /dev/cfg/c4
.fi
.in -2
.sp
.LP
\fBExample 4 \fRListing all HBA Ports with Details
.sp
.LP
The following command lists all HBA ports, with accompanying details.
.sp
.in +2
.nf
# \fBsasinfo hba-port -v\fR
HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
Type: sas-device
State: online
Local SAS Address: 5000c50000d756aa
Attached Port SAS Address: 50800201a5a502bf
Number of Phys: 4
HBA Port Name: /dev/cfg/c25000c50000d756cc
Type: sas-device
State: online
Local SAS Address: 5000c50000d756aa
Attached Port SAS Address: 50800201a5a503bf
Number of Phys: 4
HBA Name: SUNW-pmcs-1
HBA Port Name: /dev/cfg/c3
Type: sas-device
State: online
Local SAS Address: 5000c50000d756cc
Attached Port SAS Address: 50800201a5a504bf
Number of Phys: 4
HBA Port Name: /dev/cfg/c4
Type: sas-device
State: online
Local SAS Address: 5000c50000d756cc
Attached Port SAS Address: 50800201a5a505bf
Number of Phys: 4
.fi
.in -2
.sp
.LP
\fBExample 5 \fRListing \fBphy\fR Information for All HBA Ports
.sp
.LP
The following command lists \fBphy\fR information for all HBA ports.
.sp
.in +2
.nf
# \fBsasinfo hba-port -y\fR
HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
Phy Information:
Identifier: 0
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 1
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 2
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 3
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
HBA Port Name: /dev/cfg/c2
Phy Information:
Identifier: 4
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 5
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 6
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 7
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
HBA Name: SUNW-pmcs-1
HBA Port Name: /dev/cfg/c3
Phy Information:
Identifier: 0
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 1
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 2
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 3
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
HBA Port Name: /dev/cfg/c4
Phy Information:
Identifier: 4
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 5
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 6
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 7
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
.fi
.in -2
.sp
.LP
\fBExample 6 \fRListing \fBphy\fR Link Error Statistics for a Specific HBA Port
.sp
.LP
The following command lists \fBphy\fR link error statistics for a particular port.
.sp
.in +2
.nf
# \fBsasinfo hba-port -ly /dev/cfg/c1\fR
HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
Phy Information:
Identifier: 0
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Link Error Statistics:
Invalid Dword: 0
Running Disparity Error: 0
Loss of Dword Sync: 0
Reset Problem: 0
Identifier: 1
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Link Error Statistics:
Invalid Dword: 0
Running Disparity Error: 0
Loss of Dword Sync: 0
Reset Problem: 0
Identifier: 2
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Link Error Statistics:
Invalid Dword: 0
Running Disparity Error: 0
Loss of Dword Sync: 0
Reset Problem: 0
Identifier: 3
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Link Error Statistics:
Invalid Dword: 0
Running Disparity Error: 0
Loss of Dword Sync: 0
Reset Problem: 0
.fi
.in -2
.sp
.LP
\fBExample 7 \fRListing Expanders Connected to an HBA Port
.sp
.LP
The following command lists all expanders that are visible through the specified HBA port.
.sp
.in +2
.nf
# \fBsasinfo expander -p /dev/cfg/c1\fR
HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
Expander SAS Address(Tier 1): 50800201a5a502bf
Expander SAS Address(Tier 2): 50800201a5a50233
Expander SAS Address(Tier 2); 5000c5000d2da812
Expander SAS Address(Tier 1): 50800201a5a503bf
Expander SAS Address(Tier 2): 50800201a5a502d2
Expander SAS Address(Tier 2); 5000c5000d2da823
.fi
.in -2
.sp
.LP
\fBExample 8 \fRListing Detailed Information on Expanders
.sp
.LP
The following command lists detailed information on all expanders that are visible through the specified HBA port.
.sp
.in +2
.nf
# \fBsasinfo expander -v -p /dev/cfg/c1\fR
HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
Expander SAS Address(Tier 1): 50800201a5a502bf
OS Device Name: /dev/smp/expd0
State: online
Expander SAS Address(Tier 2): 50800201a5a50233
OS Device Name: /dev/smp/expd2
State: online
Expander SAS Address(Tier 2); 5000c5000d2da812
OS Device Name: /dev/smp/expd3
State: online
Expander SAS Address(Tier 1): 50800201a5a503bf
OS Device Name: /dev/smp/expd1
State: online
Expander SAS Address(Tier 2): 50800201a5a502d2
OS Device Name: /dev/smp/expd3
State: online
Expander SAS Address(Tier 2); 5000c5000d2da823
OS Device Name: /dev/smp/expd4
State: online
.fi
.in -2
.sp
.LP
\fBExample 9 \fRListing Target Ports Attached to Expanders
.sp
.LP
The following command lists all target ports that are attached to expanders connected to a specified HBA port.
.sp
.in +2
.nf
# \fBsasinfo expander -t -p /dev/cfg/c1\fR
HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
Expander SAS Address(Tier 1): 50800201a5a502bf
Target Port SAS Address: 50800201a5a504f1
Expander SAS Address(Tier 2): 50800201a5a50233
Target Port SAS Address: 50800201a5a502be
Target Port SAS Address: 5000c5000d2da8b2
Expander SAS Address(Tier 2); 5000c5000d2da812
Target Port SAS Address: 50800201a5a502be
Target Port SAS Address: 50800201a5a508b2
Expander SAS Address(Tier 1): 50800201a5a503bf
Target Port SAS Address: 50800201a5a50421
Expander SAS Address(Tier 2): 50800201a5a502d2
Target Port SAS Address: 50800201a5a503be
Target Port SAS Address: 5000c5000d2da7be
Expander SAS Address(Tier 2); 5000c5000d2da823
Target Port SAS Address: 50800201a5a503be
Target Port SAS Address: 5000c5000d2da7be
.fi
.in -2
.sp
.LP
\fBExample 10 \fRListing Target Port Information
.sp
.LP
The following command lists all target ports discovered on the host.
.sp
.in +2
.nf
# \fBsasinfo target-port\fR
Target Port SAS Address: 5000c5000bae4009
Target Port SAS Address: 5000c5000baef4b1
Target Port SAS Address: 5000c5000bae3fe1
Target Port SAS Address: 5000c5000bae49d9
Target Port SAS Address: 5000c5000bae36c5
.fi
.in -2
.sp
.LP
\fBExample 11 \fRListing Target Port Information with Topology Details
.sp
.LP
The following command lists all target ports with the HBA port and expander that they are connected to.
.sp
.in +2
.nf
# \fBsasinfo target-port -v\fR
Target Port SAS Address: 5000c5000bae4009
Type: SAS Device
HBA Port Name: /dev/cfg/c7
Expander Device SAS Address: 500e004aaaaaaa3f
HBA Port Name: /dev/cfg/c5
Expander Device SAS Address: 500e004aaaaaaa3f
Target Port SAS Address: 5000c5000baef4b1
Type: SAS Device
HBA Port Name: /dev/cfg/c7
Expander Device SAS Address: 500e004aaaaaaa3f
HBA Port Name: /dev/cfg/c5
Expander Device SAS Address: 500e004aaaaaaa3f
Target Port SAS Address: 5000c5000bae3fe1
Type: SAS Device
HBA Port Name: /dev/cfg/c7
Expander Device SAS Address: 500e004aaaaaaa3f
HBA Port Name: /dev/cfg/c5
Expander Device SAS Address: 500e004aaaaaaa3f
Target Port SAS Address: 5000c5000bae49d9
Type: SAS Device
HBA Port Name: /dev/cfg/c7
Expander Device SAS Address: 500e004aaaaaaa3f
HBA Port Name: /dev/cfg/c5
Expander Device SAS Address: 500e004aaaaaaa3f
Target Port SAS Address: 5000c5000bae36c5
Type: SAS Device
HBA Port Name: /dev/cfg/c7
Expander Device SAS Address: 500e004aaaaaaa3f
HBA Port Name: /dev/cfg/c5
Expander Device SAS Address: 500e004aaaaaaa3f
.fi
.in -2
.sp
.LP
\fBExample 12 \fRListing Target Ports with SCSI Information
.sp
.LP
The following command lists all target port details, including SCSI information for each target port.
.sp
.in +2
.nf
# \fBsasinfo target-port -s 5000c5000bae4009\fR
Target Port SAS Address: 5000c5000bae4009
Type: SAS Device
HBA Port Name: /dev/cfg/c7
Expander Device SAS Address: 500e004aaaaaaa3f
LUN : 0
OS Device Name : /dev/rdsk/c6t5000C5000BAE400Bd0s2
Vendor: Sun
Product: J4400
Device Type: Disk
HBA Port Name: /dev/cfg/c5
Expander Device SAS Address: 500e004aaaaaaa3f
LUN : 0
OS Device Name : /dev/rdsk/c6t5000C5000BAE400Bd0s2
Vendor: Sun
Product: J4400
Device Type: Disk
.fi
.in -2
.sp
.LP
\fBExample 13 \fRListing the Logical Units
.sp
.LP
The following command lists the logical units on a host.
.sp
.in +2
.nf
# \fBsasinfo logical-unit\fR
OS Device Name: /dev/rdsk/c4t50020F2300B4904Ed0s2
OS Device Name: /dev/rdsk/c4t50020F230000B4AFd0s2
.fi
.in -2
.sp
.LP
\fBExample 14 \fRListing Additional Information on Logical Units
.sp
.LP
The following command displays additional logical unit information using the \fB-v\fR option for device \fB/dev/rmt/On\fR.
.sp
.in +2
.nf
# \fBsasinfo lu -v\fR
OS Device Name: /dev/rdsk/c4t50020F2300B4904Ed0s2
HBA Port Name: /dev/cfg/c1
Target Port SAS Address: 50020f2300b4904e
LUN: 0
Vendor: Sun
Product: J4400
Device Type: Disk
OS Device Name: /dev/rdsk/c4t50020F230000B4AFd0s2
HBA Port Name: /dev/cfg/c1
Target Port SAS Address: 50020f230063100b
LUN: 0
Vendor: Sun
Product: J4400
Device Type: Disk
.fi
.in -2
.sp
.SH ATTRIBUTES
.sp
.LP
See \fBattributes\fR(5) for descriptions of the following attributes:
.sp
.sp
.TS
tab() box;
cw(2.75i) |cw(2.75i)
lw(2.75i) |lw(2.75i)
.
ATTRIBUTE TYPEATTRIBUTE VALUE
_
Availabilitysystem/storage/sas-utilities
_
Interface StabilityCommitted
.TE
.SH SEE ALSO
.sp
.LP
\fBattributes\fR(5)